Note: To find the passwordwe need a computer physical connected to your TP-LINK’s LAN port.
Part 1: Wireless Router & AP
Wireless N Router & AP:
As for the 11N wireless router & AP like the TL-WR740N&TL-WA701ND, please refer to the following:
Step1:
Step2:
Please go to Wireless ->Wireless Security page, please check which you have selected.
If it is WEP, your password usually is Key 1.
If it is WPA-PSK/WPA2-PSK, you password should be PSK Password.
If you have changed the password, please click the Save button.
.jpg)
Step3:
Reboot the Router & AP only if you’ve changed the password.
.jpg)
Wireless G Router
As for 11G wireless router like the TL-WR340G, the steps are as follows:
Step1:
Step2:
Please go to Wireless ->Wireless Settings page. You can see Enable Wireless Security in the middle of the page. If you haven’t check it, please click it to enable wireless security.
For WPA-PSK/WPA2-PSK:
.jpg)
For WEP:
.jpg)
Step3:
Reboot the router only if you’ve changed the password.
.jpg)
Wireless G AP
As for wireless G AP like TL-WA501G, the steps are as follows:
Step1:
Step 2:
Please go to Wireless ->Security Settings page to check your security type.
If it is WEP, you password usually is Key 1.
If it is WPA-PSK/WPA2-PSK, you password should be PSK Password.
If you have changed the password, please click the Save button.
.jpg)
Step 3:
Reboot the router only if you’ve changed the password.
.jpg)
Part 2: Wireless ADSL Modem Router
If you have Trendchip modem like TD-W8901G/TD-W8951ND/TD-W8961ND, please see below:
Step1:
Please refer to FAQ_87 to login the modem.
Step2:
Please go to Interface Setup->Wireless page, you can find Pre-Shared Key or Key#1.
Pre-Shared Key:
.jpg)
Key#1:
.jpg)
Step3:
Reboot the modem only if you’ve changed the password. Please go to Advanced Setup->SysRestart page, restart with current settings.
If you have TD-W8960N (Brodcom) please read below:
Step1:
Step2:
Please go to Wireless->Security page to find the wireless key:
It could be the WPA Pre-Shared Key:
.jpg)
Or the Network Key 1:
.jpg)
Step3:
Go to Management ->Reboot page to reboot the modem only if you’ve changed the password.
.jpg)
